Generally the emergency service cleanup required for clean water damage is far less. All you have to do is completely dry out your home. After everything has dried, check for mold. By leaving all windows and doors open, your home will dry much more quickly.
To find a plumber, all one has to do is flip and run through the Yellow Pages or do a search on the Internet. From there you will see loads of plumber whom are advertising to get your job. The next thing you should do as a consumer is to take remember that there some plumbers whom advertise 2 different ads in the same place. Thus it is important to not water line repair make a rush decision. Look through the list of plumbers available and call a few (minimum of 3).
After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.
Depending on your repair job you might need a bucket that will fit below the sink trap, as well as some rags and newspaper. Masking tape is useful for labeling and for wrapping around the heads of the wrench to protect your chrome tap handles. Rubber gloves are recommended, particularly when working with the toilet, but there are greases and glues that you may not want on your hands.
Investigate the plumber's reputation. Ask a neighbor before starting your search or check online for customer reviews. Call the Better Business Bureau or your city to ask about any complaints on file against this company. Finally, ask the plumbing company for references from customers. If they are reluctant to provide references water line repair call another plumber.
From your own point of view, it is important that the plumber be trustworthy and credible. Ensure the plumber comes with at least two strong references which you can verify. This will help you be more secure and suffer less anxiety.
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.